Know the Common Types of Solar Panel Damage in Indonesia
Solar panel damage comes in four common forms: broken solar cells, scratched glass, misaligned cells and faded labels. Learn the causes and what to check.
Like any piece of equipment, solar panels can break down. Even so, a solar panel is a type of device that rarely fails as long as it is well maintained. Do you know what kinds of damage can occur in a solar panel in Indonesia? Read on for the details.
Types of Solar Panel Damage
- Damaged Solar Cells
A solar panel is made up of solar cells, and these components play a key role in how the panel performs. If the solar cells are damaged, the panel cannot perform at its best. Its efficiency in absorbing sunlight also drops, which in turn affects the electric power it produces.
So what causes solar cell damage? Cells can be affected by mistakes made during soldering. Careless soldering can crack or break a cell. Damage can also come from a quality control (QC) inspection that is not done well enough, so a damaged cell is missed during lamination.
- Scratches on the Glass
A common problem that damages solar panels is scratched glass. This defect is found in more than 70% of cases. It is therefore very important to be careful during installation. Buyers should also check every detail of a solar panel in Indonesia closely so they don't buy a damaged one.
Scratches can cause serious problems for a panel's performance. Small or large, they can affect the level of power production. Even shallow scratches can interfere with energy conversion, which affects the amount of power the panel can generate. Scratches can also open a gap for dust to get in.
- Misaligned Cells
A solar panel is built from many solar cells. One of the steps in manufacturing is cutting. Misaligned cuts can spoil the look of the panel. This error does not directly affect the module's performance, but it is a pity when it happens.
Misaligned cells are a kind of defect that should be avoidable. It is very important to carry out proper inspections so that panel quality meets the standard. All equipment used must also meet the standard, to minimize defects that can disappoint customers.
- Faded and Blurred Labels
Another defect that occurs just as often in solar panels in Indonesia is a faded label. According to the IEC standard, every panel module must carry a barcode label that identifies the product and is used when claiming the warranty. The label is placed on the inside of the laminated glass layer. A failed production process can make it fade.
SUN Energy - Choosing the best solar panel is a must. Choosing the best product can extend its service life. Reportedly, a solar panel bought in good condition and properly maintained can work for 20 to 25 years. So choose the best panel to make sure it lasts.
